- Car Buying
- Car Selling
- Car Ownership
- Car Aftermarket
- On The Move
- Lifestyle
Based on sophisticated organic Polysilazane technology Nanolex Si3D forms a cross-linked three-dimensional matrix to give superb hydrophibicity and increased hardness paired with outstanding durability and a much easier to clean surface.
Nanolex Si3D will add a several micron thick clear coat with a color-darkening effect to the treated surface.
The coating thickness, combined with the density of Nanolex Si3D matrix, makes the coating highly resistant to abrasion and chemical attack caused by frequent washing.
The high-performance polymers in Si3D are all free of aromatic solvents and fluorine.
To achieve the desired results only one layer of Si3D is required.
Nanolex Si3D was developed, tested and manufactured in Germany.
How to use Nanolex Si3D
Processing temperature: 5-30°C - Avoid direct sunlight and/or high air humidity.
Read more [+]
Nanolex Si3D will add a several micron thick clear coat with a color-darkening effect to the treated surface.
The coating thickness, combined with the density of Nanolex Si3D matrix, makes the coating highly resistant to abrasion and chemical attack caused by frequent washing.
The high-performance polymers in Si3D are all free of aromatic solvents and fluorine.
To achieve the desired results only one layer of Si3D is required.
Nanolex Si3D was developed, tested and manufactured in Germany.
- superb hydrophobicity
- easy to clean surface
- increased hardness
- outstanding durability
How to use Nanolex Si3D
Processing temperature: 5-30°C - Avoid direct sunlight and/or high air humidity.
- Nanolex Si3D can be applied directly to all clear-coated (lacquered) surfaces. The lacquer surface must be dry and free of any contamination or dust. We strongly recommend to use Nanolex EX directly before the application to make sure that all oils/fillers and other dirt are removed completely from the surface. Use Nanolex microfiber towels and turn or exchange cloth frequently during cleaning/polishing.
- If the car was machine polished before the application it is absolutely necessary to remove any (mostly invisible) fillers and oils – if those are not removed a white or grey hazing will appear on the paint once Si3D was applied. The paint sealant layer itself...
Read more [+]
|
|