The HKS F-CON iS Computer Universal and OSC Set is a universal unit for most of the popular Japanese performance vehicles. The new HKS F-CON iS will help harness the power that your engine is capable of producing. The F-CON does this by adjusting the fuel and ignition timing to match your vehicles set-up (intake, muffler, intercooler). By doing this, you will notice a smoother acceleration and can have a safe boost-up to really lay the power down. Tuning can be done from inside the cockpit with the new HKS CAMP 2 driving monitored 18 different engine outputs can be monitored (up to 6 at a time). With this standard type, no base map data is included. If you do not have a tuner close by with power writing capabilites, you will need the base map type.
The OSC (Oxygen Signal Computer) included in this set will help to give a more accurate A/F and Oxygen readings.
Included as a bonus is a standard built-in fuel cut defender and speed limit defender which will save you money and time from installing the separate units (does not correspond to A/T).
This is a piggyback unit which connects to your stock computer through the use of an HKS F-CON harness which is vehicle specific. Before purchasing the HKS F-CON iS, please confirm that we supply the needed harness for your vehicle.
Functions
- Correction of Fuel amount
- Correction of Ignition Timing
- Fuel signal and Ignition Timing are controlled with trim maps inside F-CON iS. Four sub maps for each fuel and ignition control can be easily switched with dip switches.
- FCD Function- Fuel Cut at high boost level can be cancelled with FC...
Read more [+]The HKS F-CON iS Computer Universal and OSC Set is a universal unit for most of the popular Japanese performance vehicles. The new HKS F-CON iS will help harness the power that your engine is capable of producing. The F-CON does this by adjusting the fuel and ignition timing to match your vehicles set-up (intake, muffler, intercooler). By doing this, you will notice a smoother acceleration and can have a safe boost-up to really lay the power down. Tuning can be done from inside the cockpit with the new HKS CAMP 2 driving monitored 18 different engine outputs can be monitored (up to 6 at a time). With this standard type, no base map data is included. If you do not have a tuner close by with power writing capabilites, you will need the base map type.
The OSC (Oxygen Signal Computer) included in this set will help to give a more accurate A/F and Oxygen readings.
Included as a bonus is a standard built-in fuel cut defender and speed limit defender which will save you money and time from installing the separate units (does not correspond to A/T).
This is a piggyback unit which connects to your stock computer through the use of an HKS F-CON harness which is vehicle specific. Before purchasing the HKS F-CON iS, please confirm that we supply the needed harness for your vehicle.
Functions
- Correction of Fuel amount
- Correction of Ignition Timing
- Fuel signal and Ignition Timing are controlled with trim maps inside F-CON iS. Four sub maps for each fuel and ignition control can be easily switched with dip switches.
- FCD Function- Fuel Cut at high boost level can be cancelled with FCD function.
- SLD Function- Vehicle speed signal can be controlled to cancel speed limiter by stock ECU. (Not for Automatic Transmission and electro-magnet pick up type sensor).
- Engine Check Function- Even with F-CON iS, engine check function of stock ECU works (Except some vehicles).
- A/T Shift Up, Shift Down Ignition Compensation- To prevent knocking of vehicles with automatic transmission during shift up at high load or shift down for acceleration, engine rpm difference and throttle position is kept and ignition timing is retarded for a certain period.
- NVCS Control Function- Solenoid of Nissan NVCS (Nissan Valve Control System) can be controlled with F-CON iS with RPM + Water Temperature condition.
- Air Flow (Intake Air Volume sensor) Conversion Function- Air flow meter signal input can be converted with a 16x24 map with Air Flow Input value and RPM axis. When characteristics of air flow meter output are changed from stock condition, air flow meter signal can be corrected.
- Video Output Display Function (NTSC only)- Output signals from F-CON iS can be displayed on a monitor. - Up to 18 items - Each data can be shown by bar graph and numbers. - With Screen changeover switch, items of the screen can be changed. (Items can be selected with PowerWriter.) - Basic Items : Engine rpm, Vehicle Speed, Air Flow meter output voltage, Throttle Position, Water Temperature, Intake Air Temperature, Battery Voltage, Injector Duration, Pressure With DB Meter I/F Unit, A/F Knock Amp. or Communication Cable, any data can be shown on monitor - I/F Unit + Sensors
- Items : Boost (Vacuum) Pressure, Oil Temperature, Water Temperature, Oil Pressure, Fuel Pressure, Exhaust Gas Temperature - A/F Knock Amp.
- Items : A/F value, Knock Sensor level- Communication Harness
- Items : OBD Ignition Timing, A/F Correction Value, A/F Close-Loop Value
- One of I/F Unit or Communication Cable can be connected.
Read less [-]
Brand Manager for this product?
