The bit One is a multi-function digital processor capable of interfacing with any analog and/or digital source, turning any ordinary system into one with very high-level performance.
Despite its compact size, the bit One is equipped with a powerful, latest generation 266 MHz / 32 bit floating point DSP microprocessor, working in real time on all the functions of the most complete systems.
Managed and configured by a simple and intuitive computer software, it is possible to make adjustments to improve the signal through each phase of its path; from input to output.
Specifications
Power supply
- Voltage 11 ÷ 15 VDC
- Idling current 0.45 A
- Switched off without DRC
- Switched off with DRC
- Remote IN voltage 7 ÷ 15 VDC (1.3 mA)
- Remote OUT voltage (Bit One) 12 VDC (20 mA)
- Remote OUT voltage (Bit One.1) 12 VDC (130 mA)
Signal stage
- Distortion - THD @ 1 kHz, 1 VRMS Output 0.002 %
- Bandwidth @ -3 dB 4.5 ÷ 21k Hz
- S/N ratio @ A weighted
- Digital Input 112 dB
- Master Input 96.5 dB
- AUX Input 100 dB
- Channel Separation @ 1 kHz 77 dB
- Input sensitivity (Pre In) 0.3 ÷ 5 V
- Input sensitivity (Speaker In) 1.2 ÷ 20 V
- Input impedance (Pre In) 20 kΩ
- Input impedance (Speaker In) 5 kΩ
- Max Output Level (RMS) @ 0.1% THD 4 V
Input stage
- Low level (Pre) Ch1÷Ch6, AUX1 L/R, AUX2 L/R
- High Level (Spk) Ch1÷Ch8, Phone IN
- Digital Coaxial, Optical (S/PDIF Max 48 kHz/24 bit)
Output stage
- Low level (Pre) Ch1÷Ch8
- Digital ADLink (Ch1÷Ch8 S/PDIF)
Connection
- From / To Personal Computer 1 x USB / B (2.0)
- To Audison Electronics 2 x ACLink control bus
- Crossover N. 8 (one each output...
Read more [+]
The bit One is a multi-function digital processor capable of interfacing with any analog and/or digital source, turning any ordinary system into one with very high-level performance.
Despite its compact size, the bit One is equipped with a powerful, latest generation 266 MHz / 32 bit floating point DSP microprocessor, working in real time on all the functions of the most complete systems.
Managed and configured by a simple and intuitive computer software, it is possible to make adjustments to improve the signal through each phase of its path; from input to output.
Specifications
Power supply
- Voltage 11 ÷ 15 VDC
- Idling current 0.45 A
- Switched off without DRC
- Switched off with DRC
- Remote IN voltage 7 ÷ 15 VDC (1.3 mA)
- Remote OUT voltage (Bit One) 12 VDC (20 mA)
- Remote OUT voltage (Bit One.1) 12 VDC (130 mA)
Signal stage
- Distortion - THD @ 1 kHz, 1 VRMS Output 0.002 %
- Bandwidth @ -3 dB 4.5 ÷ 21k Hz
- S/N ratio @ A weighted
- Digital Input 112 dB
- Master Input 96.5 dB
- AUX Input 100 dB
- Channel Separation @ 1 kHz 77 dB
- Input sensitivity (Pre In) 0.3 ÷ 5 V
- Input sensitivity (Speaker In) 1.2 ÷ 20 V
- Input impedance (Pre In) 20 kΩ
- Input impedance (Speaker In) 5 kΩ
- Max Output Level (RMS) @ 0.1% THD 4 V
Input stage
- Low level (Pre) Ch1÷Ch6, AUX1 L/R, AUX2 L/R
- High Level (Spk) Ch1÷Ch8, Phone IN
- Digital Coaxial, Optical (S/PDIF Max 48 kHz/24 bit)
Output stage
- Low level (Pre) Ch1÷Ch8
- Digital ADLink (Ch1÷Ch8 S/PDIF)
Connection
- From / To Personal Computer 1 x USB / B (2.0)
- To Audison Electronics 2 x ACLink control bus
- Crossover N. 8 (one each output channel)
- Filter type Full / High Pass / Low Pass / Band Pass
- Filter mode and slope Linkwitz @ 12 / 24 / 36 / 48 dB
- Butterworth @ 6 / 12 / 18 / 24 / 30 / 36 / 42 / 48 dB
- Crossover Frequency 70 steps @ 10 ÷ 20k Hz
- Phase control 0° / 180°
Equalizer
- On High Level Inputs (Speaker In) Automatic De-equalization
- On AUX Inputs N.4 x Graphic: ±12 dB @ 31 Band, ISO 1/3 Oct, 20 ÷ 20k Hz
- On Outputs N.8 x Graphic: ±12 dB @ 31 Band, ISO 1/3 Oct, 20 ÷ 20k Hz
- Dynamic Equalization Self-adjusting System between low and high listening levels
Time Alignment
- Distance 2.8 ÷ 748 cm / 1.1 ÷ 294.5 inches
- Delay 0 ÷ 22 ms
- Step 0.08 ms, 2.8 cm, 1.1 inch
Size
- W (Width) x H (Height) x D (Depth) mm/inch 150 x 32.3 x 225 / 5.90" x 1.27" x 8.85"
- Weight kg/lb 1,345 / 2.965
Read less [-]